Replacement Part List

6
MAINTENANCE AND STORAGE
Before performing maintenance, the log splitter must be placed in maintenance mode.
1.) Turn off engine.
2.) Move the control valve handle forward and backward to relieve hydraulic pressure.
After performing maintenance, make sure all guards, shields, and safety features are put back
in place. Failure to follow this warning can result in serious injury.
Refer to the engine owner’s manual for engine maintenance.
What When How
Hoses Each Use
Inspect for exposed wire mesh and leaks. Replace
all worn or damaged hoses before starting engine
Hydraulic Fittings Each Use
Inspect for cracks and leaks. Replace all damaged
fittings before starting engine
Nuts and Bolts
Each Use
Check for loose bolts
Beam
Each Use
Apply grease to beam surface
Moving Parts
Each Use
Clear debris
SPECIFICATIONS
！
！
！
Maximum Pressure……………….
Maximum Flow ………………….
Hydraulic Fluid Capacity ………..
Hydraulic Fluid Type …………….
Coupler Size ……………………...
Maximum Towing Speed…………
Maximum Log Length …………...
Hydraulic Cylinder Bore …………
Hydraulic Cylinder Stroke ……….
Maximum Log Diameter ………...
3500 psi
18GMP/18GPM
30L /50T, 35L/60T
10wt AW32, ASLE
H-150, or ISO32
2” Ball
45MPH
25.6 "
5.5" /6"
23.6 "
23.6"/25.6"