Use and Care Manual

engages the wheels and tines. Releasing the lever stops the wheels and tines and brings
the tiller to a complete stop.
REVERSE LEVER
Engages wheels and tines into reverse.
Pulling the drive safety control lever(REVERSE) toward the handlebar reverses tiller.
Releasing the lever stops the wheels and tines.
ADJUSTMENTS
WHEEL LOCK PINS
Place wheels in tilling position.
1. Remove lock pin. Align hole in axle with hole in wheel hub.
2. Insert lock pin through holes, fold lock pin ring to secure pin to axle.
3. Firmly lock wheel and axle together before tilling.
4. Repeat for other wheel.
NOTE: Always have both wheel lock pins in or out. Do not operate tiller with only
one wheel locked.
To place wheels in free-wheel position.