Use and Care Manual

STEP 3: Attach handle bar to the Tiller
1. Insert four fastness bolts for each side in every holes.
2. Start fastness nuts on each bolt.
3. Tighten all the nuts.
STEP4 Fill Engine Crankcase
IMPORTANT
Engine is shipped from factory without oil. Engine oil must be added before starting
engine.
1. Add oil according to engine manual. Do not overfill. Use clean, high quality detergent
oils. Do not mix oil with gasoline. Oil level must be full. Check the oil level by removing oil
fill plug.
2. Always check oil level before starting engine. Refer to engine manual for capacity and
type of oil to use.