Cut Sheet

Project: ______________________________________________________________ Approval Stamp:
Architect / Engineer: ____________________________________________________
Date: _________________________ Phone: ________________________________
Contractor: ___________________________________________________________
Address: _____________________________________________________________
____________________________________________________________________
Notes 1: ______________________________________________________________
____________________________________________________________________
Notes 2: ______________________________________________________________
____________________________________________________________________
®
1
5
⁄8” Framing System – Pipe & Conduit Supports
MATERIAL
Unistrut pipe clamps, unless noted, are punch-press made from
hot-rolled, pickled and oiled steel plates, strip or coil, and con-
form to ASTM specifications A1008, A575, A576, A635, or A36.
The fitting steel also meets the physical requirements of ASTM
A1011 SS GR 33. The pickling of the steel produces a smooth
surface free from scale.
Many items are also available in stainless steel.
Consult factory for ordering information.
FINISHES
Pipe supports are available in:
• Electro-galvanized(EG),conformingto
ASTM B633 Type III SC1
• Hot-dippedgalvanized(HG),conformingto
ASTMA123orA153(hardware)
• Perma-GreenIII(GR),andplain(PL).
9/12/08
Slotted hex head screw and nut included with EG or HG Finish.
P1109 t h r u P1126 Pi P e Cl a m P s f o r ri gid st e e l Co n d u i t
Part
No.
Conduit
Size
In
O.D.
Size
In (mm)
Thickness
Gauge
(mm)
Wt/100 pcs
Lbs (kg)
Design
Load
Lbs (kN)
P1109
3
⁄8 0.675 16 10 400
17.1 1.5 4.5 1.78
P1111
1
⁄2 0.840 16 11 400
21.3 1.5 5.0 1.78
P1112
3
⁄4 1.050 14 15 600
26.7 1.9 6.8 2.67
P1113
1 1.315 14 17 600
33.4 1.9 7.7 2.67
P1114
1
1
⁄4 1.660 14 19 600
42.2 1.9 8.6 2.67
P1115
1
1
⁄2 1.900 12 29 800
48.3 2.7 13.2 3.56
P1117
2 2.375 12 34 800
60.3 2.7 15.4 3.56
1
1
⁄4"
(32)
Design Load
Part
No.
Conduit
Size
In
O.D.
Size
In (mm)
Thickness
Gauge
(mm)
Wt/100 pcs
Lbs (kg)
Design
Load
Lbs (kN)
P1118
2
1
⁄2 2.875 12 40 800
73.0 2.7 18.1 3.56
P1119
3 3.500 12 47 800
88.9 2.7 21.3 3.56
P1120
3
1
⁄2 4.000 11 62 1,000
101.6 3.0 28.1 4.45
P1121
4 4.500 11 67 1,000
114.3 3.0 30.4 4.45
P1123
5 5.563 11 80 1,000
141.3 3.0 36.3 4.45
P1124
6 6.625 10 102 1,000
168.3 3.4 46.3 4.45
P1126
8 8.625 10 130 1,000
219.1 3.4 59.0 4.45