Operation Manual

Owner’s Manual

CORE 50 Sweeper Scrubber Page 17

PowerBoss

The Power of Clean

MAIN SCRUB

BRUSHES

(Continued)

DOUBLE

SCRUBBING

5. Lower the squeegee with the squeegee switch. The

squeegee can also be raised with the same switch.

Lowering the squeegee activates the scrubbing impeller

automatically. When the squeegee is raised, the

impeller will continue to run for ten (10) seconds before

shutting off.

When machine travel stops, the scrub brushes stop rotating

and solution flow is interrupted until travel resumes. This

prevents flooding the floor and prevents excessive brush

wear and floor damage.

6. Drive forward slowly.

Use care when driving on wet surfaces.

Always travel slowly on grades.

For double scrubbing, proceed as follows:

1. Follow the procedures on the previous page for

scrubbing without lowering the squeegee to the floor

and with the sweeping brooms off.

2. Make multiple passes over the same area of the floor as

conditions dictate.

3. Lower the squeegee with the squeegee switch for the

final pass. The squeegee can be raised with the same

switch.

SCRUBBING CONTROLS

NOTE

CAUTION