Operation Manual

Owner’s Manual
R
PowerBoss, Inc. A Member of the Hako Group © 2007 PowerBoss
®
CORE 50 Sweeper Scrubber Page 28
PowerBoss
®
The Power of Clean
PLANNED MAINTENANCE CHART (Continued)
SERVICE
(BY MAINTENANCE AREA)
HYDRAULIC SYSTEM
X Check hydraulic reservoir dipstick and fill as
needed.
X Replace breather cap filter element.
X Replace hydraulic fluid and filter
X Check functioning of directional control pedal
and adjust as needed.
X Clean hydraulic fluid strainer in reservoir.
X Inspect hydraulic oil cooler fins and clean as
needed (if so equipped).
X Blow out hydraulic oil cooler fins with
compressed air (if so equipped).
SWEEPING COMPONENTS
X Inspect brooms for wear and remove strings and
debris from bristles and drive assembly.
X Inspect broom skirts for wear and adjust or
replace as needed.
X Rotate main broom end-to-end.
X Perform main broom adjustment test and adjust
as needed.
X Inspect the side broom for wear and adjust as
needed.
Replace main and side brooms as needed.
Main Broom—Bristles are 1” in length.
Side Broom—Bristles are 3” in length.
FREQUENCY (IN HOURS)
DAILY
50
100 200 500