Operation Manual

Owner’s Manual
R
PowerBoss, Inc. A Member of the Hako Group © 2007 PowerBoss
®
CORE 50 Sweeper Scrubber Page 59
PowerBoss
®
The Power of Clean
TROUBLESHOOTING (CONTINUED)
PROBLEM CAUSE SOLUTION
Loss of dust control. Broom skirts or seal worn. Replace.
Skirt clearance from floor
exceeds ⅛”.
Adjust clearance.
Dust control filters clogged. Clean filters.
Filter seals worn or missing. Replace.
Poor seal contact at hopper
lid or impeller inlet.
Visually check and adjust, if
necessary.
Sweeper unit leaving debris. Hopper full. Dump hopper.
Broom(s) out of adjustment. Adjust.
Hopper flaps damaged or
missing.
Replace or adjust clearance.
Dust control filters clogged. Clean filters.