User manual

Smart-Switch
- 3 -
Dear customer,
Congratulations on your decision to purchase the Smart-Switch from our range!
This innovative product is the world’s first electronic multi-function switch system,
developed and produced by PowerBox Systems GmbH. The unit is designed to switch the
receiving system on and off safely and reliably, and to monitor the airborne power supply.
The switch housing accommodates a modern, failure-proof electronic switch and a four-
stage voltage monitor designed for use with all the usual power sources employed in
modeling: four-cell and five-cell NC or NiMH batteries, and two-cell LiPo packs.
The dual connecting leads have a conductor cross-section of 0.34 mm², and inside the
elegant, extremely robust plastic housing they are both soldered directly (i.e. in a straight
line) to extra-wide solder pads, where they are encased in a special support adhesive for
additional protection from possible vibration damage.
We recommend the Smart-Switch primarily for the following applications and types of
model:
- all models which were previously equipped with mechanical switches,
- small to medium-sized model aircraft,
- model gliders,
- model helicopters
- model cars,
- model boats, and
- all kinds of petrol engine ignition