Product Manual
39
Assembly Instructions
Step 4 – Log Stripper Assembly
• Align holes in the log stripper with the holes in the trunnion mount
• Attach the log stripper to beam using the nuts and bolts from Parts
Bag. Torque to 21 ft.-lb.
• Stand assembled beam onto the end plate in the vertical position and
move to the side.
Tools Needed
• 13mm Wrench
• Torque Wrench
Fasteners Needed from Parts Bag:
Log Stripper to Beam
M8-1.25 X 25mm Bolt
Qty: 6
Log Stripper to Beam
M8-1.25 Nut
Qty: 6
Log Stripper
Nuts
Bolts
Cylinder
Beam