Product Manual

Assembly Instructions

Step 8 – Tow Bar Assembly

• Place tow bar assembly on flat surface and orient as shown below.

Make sure a helper holds onto the top of the beam assembly during the

remainder of this step. The beam is very heavy and dangerous if it tips

over.

• Align the pivot hole on the beam assembly to the pivot hole on the

tow bar assembly and insert pivot pin.

• Insert cotter pin through hole in pivot pin. Use pliers to spread and

bend prongs in opposite directions to secure.

Tools Needed

• Pliers

Fasteners Needed from Parts Bag:

Pivot Pin

Part # 790472

Qty: 1

Cotter Pin

Part # 778674

Qty: 1

Pivot Pin

Cotter Pin

Pivot Hole