Product Manual

Assembly Instructions

Step 11 – Log Cradle Assembly

• Install (2) bolts and (2) nut into the bottom holes of the beam.

• Using the slots in the bottom of each log cradle arm, rest the log cradle

arms on the installed bolts and nuts.

• Install the remaining (2) bolts and (2) nuts into the top holes of the

beam and log cradle arms.

• Torque to 21 ft.-lb.

Tools Needed

• 13mm Wrench

• Torque Wrench

Fasteners Needed from Parts Bag:

Bolts

Nuts

Cradles

Beam

Cradles to Beam

M8-1.25 x 30mm Bolt

Qty: 4

Cradles to Beam

M8-1.25 Nut

Qty: 4