Product Manual
51
Assembly Instructions
Step 16 - Fittings
• Remove plugs from ports in control valve
• Lubricate O-ring and threads on fitting with clean oil
• Looking at fitting from end with nut/washer/O-ring assembly, turn nut
clockwise as far as possible
• Using wrench, turn (1) Valve to Hose Fitting into valve port marked
“OUT” until washer touches control valve. Continue turning until
washer touches thread nearest wrench pad
• Back off fitting counterclockwise not exceeding one revolution until it
is oriented in the correct position
• Place wrench on the wrench pad of fitting to prevent fitting from
turning and torque nut to 70-87 ft.-lb.
• Repeat installation process for second Valve to Hose Fitting into valve
port marked “IN”.
Tools Needed
• 1 1/4” Wrench
• 1 1/16” Wrench
OR
• Crescent Wrench
(2 Needed)
• Torque Wrench
Fittings Needed from Parts Bag:
Valve to Hose
Fittings
Valve Port
Part # 778831
Valve to Hose Fitting
Qty: 2
Nut
O-ring
Washer