Product Manual

Page 4 of 20
Intended Use
The PowerHorse 1.0 HP Shallow Well Pump is a single-stage domestic water pump designed for
pumping potable water. Shallow well pumps are designed for applications where the water level is
less than 26 feet below the pump. This pump is non-submersible.
Technical Specifications
Property
Specification
Motor
120 V, 60 Hz, Single Phase
Max. Flow
978 GPH
Max. Head
130 ft.
Max. Lift
26 ft.
Max. PSI
66.7 PSI
Pressure Switch
30psi ON, 43.5 PSI OFF
Intake Port
1 in.
Discharge Port
1 in.
Pressure Tank Capacity
6.3 Gal
Important Safety Information
• Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
• Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
do the job better and more safely at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
• This product may contain chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.