Use and Care Manual

6. Tighten all the hardware with the tools supplied and reinstall the Fascia panel using the M8 flange bolt and serrated
locking nut.
Install the mounting feet and wheels.
7. The mounting feet (items 36, 37, 50, 57, and 62) are supplied in the accessory bag. Locate these parts and install
according to the following instructions and exploded view. Block up the generator by using a 2 x 4 or similar device.
Install the feet with the 5MM Allen head wrench and 13MM wrench provided.
10
Customer Hotline [phone]English