Product Manual

ManualsBrandsPowermatic ManualsPower Tools2000B Table Saw — 5 HP, 3 PH, 230/460V, 50in. Rip with Accu-Fence

5.0 Specifications for PM2000B

Table 1

Model number

PM2000B

Stock number – saw only

(see Table 2 below for kit configurations)

PM231B PM251B PM253B

Motor and Electricals

Motor type Totally enclosed, fan cooled, induction

Horsepower 3 HP 5 HP 5 HP

Motor phase 1 PH 3 PH

Motor voltage 230 V

230/460 V

(prewired 230 V)

Cycle 60 Hz

Listed FLA (full load amps) 14.5 A 21 A 13 / 6.5 A

Motor speed 3450 RPM

Starting amps 86 126 120

Running amps (no load) 4.9 4.8 6.5

Start capacitor 400MFD 125VAC 400MFD 250VAC n/a

Run capacitor 40µF 350VAC 30µF 500VAC n/a

Power transfer Poly-V belt

On/off switch Magnetic switch, with safety key

Power cord and plug not supplied

Recommended circuit size

20 A 30 A 20 A

Sound emission without load

84 db at 100cm; 89 dB at 50cm

Arbor and blade

Arbor diameter 5/8 in. (15.875 mm)

Arbor speed 4500 RPM

Arbor lock yes

Arbor wrench included

Blade included Ø10 in. (254mm), 0.079 in. (2.0mm) thk, 0.118 in. (3.0mm) kerf,

40T, AB, carbide tips

Maximum depth of cut at 90 degrees 3-1/8 in. (80 mm)

Maximum depth of cut at 45 degrees 2-1/8 in. (54 mm)

Maximum rip to right of blade 30 in. (762 mm) or 50 in. (1270 mm)

Maximum rip to left of blade 13-1/2 in. (343 mm)

Dado maximum width 13/16 in. (21 mm)

Dado maximum diameter 8 in. (203 mm)

Blade tilt Left, 0° to 45°

Table

Main table dimensions, L x W 30-1/2 x 22 in. (775 x 559 mm)

Table dimensions with extensions, L x W 30-1/2 x 42 in. (775 x 1067 mm)

Table area in front of blade at maximum height 11-1/4 in. (286 mm)

Table surface from floor, casters disengaged 35 in. (889 mm)

Miter T-slot, W x D 2 slots; 3/4 x 3/8 in. (19 x 10 mm)

Edge bevel Front and rear

Dust collection

Dust port outside diameter 4" (101.6 mm)

Recommended minimum extraction volume 400 CFM (0.5 CMM)