Product Manual

5
4.0 Specifications for Powermatic Cyclone Dust Collector
Table 1
Model number
PM2200
Stock
numbers
Complete kit with HEPA filter 1792200HK
Main unit 1792200B
Stand 1792200S
HEPA canister filter 1792200H
Motor and electrical
Motor type totally enclosed fan cooled, induction, capacitor start
Horsepower 3HP (2.2kW)
Phase Single
Voltage 230 V
Cycle 60 Hz
Listed FLA (full load amps) 16 A
Starting amps 65 A
Running amps (no load) 6 A
Start capacitor 250MFD 250VAC
Run capacitor
35F 400VAC
On/off switch Magnetic contactor with overload protection
Motor speed 3450 RPM
Power cord 12AWG x 3C, SJT, 6 ft.
Power plug included 6-20P
Recommended circuit size
1
20 A
Sound emission
2
78 dB at 9.84 ft (3m)
Remote control system Radio frequency (FCC approved); range up to 50 ft. (15m)
RC transmitter battery 2 x AA, 1.5V
Timer setting 2,4,6,8 hours
Capacities
Inlet diameter 8 in. (203 mm)
Inlet adaptors, number of 3
Inlet adaptors, diameter of 4 in. (100 mm)
Air Flow
3
1543 CFM (40.8 m
3
/min)
Air Velocity
3
4380 FPM (22.4 m/s)
Static pressure loss (WC)
3
2.24 inH
2
O (57 mmH
2
O)
Maximum static pressure loss (WC)
3
14.30 inH
2
O (363 mmH
2
O)
Impeller
Diameter 15.8 in. (403 mm)
Fin thickness 14 ga.
Type radial fin
Material steel
Canister filter
Filter type cartridge and spunbond polyester
Canister filter diameter 14-9/16 in. (370 mm)
Canister filter length 31-3/8 in. (1000 mm)
Filter surface area 46.82 sq. ft. (4.35 m
2
)
HEPA Filter efficiency rating 100% of 2 micron particles, 100% of 1 micron particles
Cleaning system Automatic when stop button is pushed
Collection bags
Bag material polyethylene
Drum collection bag size (Dia. x L) 38-9/16 x 47-1/4 in. (980 x 1200 mm)
Canister collection bag size (Dia. x L) 19-11/16 x 23-5/8 in. (500 x 600 mm)