Owner's manual

12
CAUTION:
Lubricate
Nailer with
2-4 drops of
Industrial Light
Oil for every
8 hours of use.
↑
R
E
L
O
A
D
Nailer is activated by striking the plunger. Do not work on
scaff olding, ladders, elevated or uneven surfaces where the
nailer could fall and self-activate. Do not leave air attached to
the Nailer when moving from one install location to another.
Refi ll the nail channel with a
clip of Powercleats when empty.
Pull the Nail-Pusher assembly
to the back of the channel when
cleats are reloaded.
NAILER SAFETY DECALS
• Read and understand the tool labels and
manuals before operating. • Operators and
others in work area MUST wear EYE and EAR
protection. • Use safety glasses with side
shields. • NEVER point tool at yourself or
others in the work area. • Only connect air to
an unloaded tool and always keep tool
pointed in a safe direction. • Disconnect air
when clearing jams, servicing or when tool is
not in use. • Use only clean, dry, regulated air
not exceed 110 psi. • Never use oxygen or
other bottled gasses-explosion may occur.
Warning!