Owner's manual

15
The PowerPalm™
"The PowerPalm is the industries best solution to blind nailing
close to the wall. Saves both, time and money!"
Pressure activated...simply press down, and let the tool do the
work. The Power Palm will allow blind nailing closer to the
wall and reduce the amount of face nailing. "Blind nail, top
nail...tight spots and corners, the PowerPalm gets them all!"
Featuring 360 degree swivel tip for fi tting awkward or tight
spaces. Magnetic cleat holder keeps nail in position. Uses
both 16 gage and 18 gage Powercleats–Use the same fastener
throughout your install! Part number: PALM001
Powerjack® Model 500
Truly a Tinker's TOOL, the POWERJACK Model 500 is
designed to push or pull fl ooring strips into place and hold
them tightly. The PowerJack Model 500 self adjusts from
5/16” to 3/4" thickness fl ooring. It can be used to either push
or pull wood fl ooring strips into place and ratchets tightly
for hands free operation. The base of the PowerJack 500
has mounting holes for mid-fl oor use. Simply screw nail the
PowerJack 500 to your sub fl oor -in front of your fl ooring
strips -and ratchet the fl ooring strips tight. Also great for under
cabinet and kick plate installation.
Part number: PJ500
Powerjack
Model 500
15.5 Gauge PowerStaples™
Now you can get fl ooring
staples with the strength
and holding power you need
to build a fl oor you can
depend on. The Carbon Steel
Powerstaples are designed
for use with the Tongue and
Groove PowerStapler 445FS,
but can be used with all
15-15.5 gauge 1/2″ crown
fl ooring PowerStaplers.
Closest you
can get to
the wall!
Pneumatic PowerPalm™
Featured Accessory Products
Length Qty Part No
2” 7.7M PS-20077
2” 6M PS-2006
2” 5M PS-2005
1-3/4” 5M PS-1755
1-1/2” 6M PS-1506
1-1/2” 5M PS-1505