Operation Manual

Step 4: assembling seat
A. Fix the Seat (20) to the seat post (21) as shown.
B. Insert the seat plastic cover (27) to the vertical Seat
post (25). At the desired position, align holes and fix in
place with the Locking Knob (29).
C. Slide the seat post (21) into the vertical seat post (25)
and, at the desired position, aligns holes and fix in place
with the Locking Knob (24) and Washer (23).
Step 5: assembling pedals
Attach the pedals to the crank arms as shown in
FIG.5,
A. Be sure the left pedal (1) marked (L) is attached
to the left crank arm and tightened to the left.
B. The right pedal (26) marked (R) is attached to
the right crank arm and tightened to the right.