Technical data

ManualsBrandsPowerplus ManualsDo-It-Yourself toolsPOWX028

POWX028 EN

1 APPLICATION ...................................................................................... 2

2 DESCRIPTION (FIG. A) ....................................................................... 2

3 PACKAGE CONTENT LIST ................................................................. 2

4 SYMBOLS ............................................................................................ 2

5 GENERAL POWER TOOL SAFETY WARNINGS .............................. 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 3

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETY-HINTS FOR IMPACT-DRILL: ........................ 4

7 OPERATION ......................................................................................... 5

7.1 Switching on/off (Fig. 1) .......................................................................................... 5

7.2 Forward/reverse lever (Fig. 2) ................................................................................ 5

7.3 Variable speed (Fig. 3) ............................................................................................ 5

7.4 Two-speed selector (Fig. 4) .................................................................................... 5

7.5 Drill or impact mode selector (Fig. 5)..................................................................... 5

7.6 For proper operations ............................................................................................. 6

8 MAINTENANCE ................................................................................... 6

9 TECHNICAL DATA .............................................................................. 7

10 NOISE ................................................................................................... 7

11 WARRANTY ......................................................................................... 7

12 ENVIRONMENT ................................................................................... 8

13 DECLARATION OF CONFORMITY .................................................... 8

Summary of content (8 pages)

PAGE 1
POWX028 EN 1 APPLICATION ...................................................................................... 2 2 DESCRIPTION (FIG. A) ....................................................................... 2 3 PACKAGE CONTENT LIST ................................................................. 2 4 SYMBOLS ............................................................................................ 2 5 GENERAL POWER TOOL SAFETY WARNINGS .............................. 3 5.1 Work area ........
PAGE 2
EN POWX028 IMPACT DRILL 1200W POWX028 1 APPLICATION The power tool is intended for driving and drilling through wood, metal, plastics and masonry. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5.
PAGE 3
POWX028 5 GENERAL POWER TOOL SAFETY WARNINGS EN Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area  Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 4
EN POWX028  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 5.4 Power tool use and care  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.  Do not use the power tool if the switch does not turn it on and off.
PAGE 5
EN POWX028 Always use ear-protection, when machine is in use! Recommended nominal permanent load. operating-time: approx. 20 minutes under Rest after permanent operation: approx. 5-10 minutes. 7 OPERATION WARNING: Prior to assembly and adjustment always pull out the power plug from the mains socket. 7.1      Switching on/off (Fig. 1) Plug the cord set into power socket. Start the tool by squeezing the ON/OFF switch (9). Release the ON/OFF switch to stop the tool.
PAGE 6
POWX028  7.6         EN Push the button of drill/impact mode selector to the drill position “ ” to select the drill mode of action. For proper operations Hold the drill with your first two fingers on the ON/OFF switch (9). Use the auxiliary handle subassembly (3) where possible to gain extra control and to prevent fatigue. For wood, use twist drill bits, spade bits power auger bits, or hole saw. For metal use high seed steel twist drill bits or hole saws.
PAGE 7
EN POWX028 9 TECHNICAL DATA Mains voltage Power input 230-240V ~ 50Hz 1200W No load speed Chuck capacity Double isolation Impact rate Max. drill capacity Wood Steel Concrete 0-1200 / 0-3000 min-1 13mm Yes 0-48000 min-1 40 mm 16 mm 16 mm 10 NOISE Noise emission values measured according to relevant standard. (K=3) Acoustic pressure level LpA 96 dB(A) Acoustic power level LwA 107 dB(A) ATTENTION! Wear over 85 dB(A).
PAGE 8
EN POWX028    We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.