Operation Manual

ManualsBrandsPowerplus ManualsSawPOWX221

POWX221 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION (FIG A) .................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Work area ................................................................................................................ 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 ADDITIONAL SAFETY WARNINGS ............................................... 5

6.1 Before use, remove the transport protection: ....................................................... 6

6.2 Switch off the machine immediately when you discover: .................................... 7

6.3 Replacing cables or plugs ...................................................................................... 7

6.4 Using extension cables .......................................................................................... 7

7 ASSEMBLY ...................................................................................... 7

7.1 Assembly of the bench extensions Fig. F ............................................................. 7

7.2 Assembly of the bench saw on the workbench Fig. B & C ................................... 7

7.3 Assemble undercarriage Fig. G ............................................................................. 8

7.4 Assemble bracket/push stick. ................................................................................ 8

7.5 Assembly and attachment of the rip fence Fig. D ................................................. 8

7.6 Assembly of the riving knife and the protective cap Fig. E .................................. 8

7.7 Assembly of the saw blade..................................................................................... 8

7.8 Mounting the push stick holders ........................................................................... 9

7.9 Use of the mitring set-up Fig. A ............................................................................. 9

8 OPERATION ..................................................................................... 9

8.1 Lengthwise sawing ................................................................................................. 9

8.2 Lengthwise sawing with a(vertical) mitre ............................................................ 10

8.3 Lengthwise sawing of narrow workpieces. ......................................................... 10

8.4 Crosswise sawing ................................................................................................. 10

8.5 Crosswise sawing with a vertical mitre ............................................................... 10

Summary of content (13 pages)

PAGE 1
POWX221 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION (FIG A) .................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Work area ............................
PAGE 2
POWX221 EN 8.6 Crosswise sawing with a horizontal mitr ............................................................. 10 9 CLEANING AND MAINTENANCE................................................. 10 9.1 Cleaning................................................................................................................. 10 9.2 Lubrication ............................................................................................................ 11 10 TROUBLE SHOOTING .........................
PAGE 3
EN POWX221 SAW TABLE 1500W POWX221 1 APPLICATION The table saw is designed for the cutting of timber and plastic commensurate with the machine’s size. It is not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. Protective cap Fence Bench inlay Mitre handle Height handle 6. 7. 8. 9.
PAGE 4
POWX221 EN Read manual before use 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area  Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 5
EN POWX221    Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
PAGE 6
POWX221 EN 10. Always lock the different degree set-ups before you start processing. 11. Only buy suitable saw blades with a number of revolutions of at least 6000 revolutions per minute. 12. Only use the correct saw blade. Too small or too big saw blades are extremely dangerous. 13. Regularly inspect the saw blade for any faults. Replace the saw blade if necessary. 14. Grease the new saw blade and clean the flanges before you assemble the new blade.
PAGE 7
POWX221  EN  The handles for height and mitre setting of the saw blade are located in the transport protection inside the machine. Reassemble the bottom plate. 6.2     Switch off the machine immediately when you discover: A defective mains plug or mains lead; A defective switch. Overheating of the machine. Smoke or odeur caused by scorched insulation. 6.3 Replacing cables or plugs Immediately throw away old cables or plugs when they have been replaced by new ones.
PAGE 8
POWX221 EN 7.3 Assemble undercarriage Fig. G  Turn the machine upside down.  Remove the black plastic bottom plate by unscrewing the 6 screws. (Fig. G-1).  Unscrew the adjusting knob on the front and tilt the motor (Fig. G-2), then remove the transport packing (Fig. G-3).  Now place one by one the uprights in the casing of the sawing bench (Fig. G-4).  Secure the uprights with 4 screws using a screwdriver, do not completely tighten the screws (Fig. G-5).
PAGE 9
EN POWX221   Now use the 2 keys: one for the flange and one for the nut and now clamp it. Now put the inlay back in the bench and fasten it. 7.8 Mounting the push stick holders Mount both push stick holders on the side of the machine using the bolts and rings supplied. 7.9 Use of the mitring set-up Fig. A By turning the handle at the side of the machine you can adjust the saw blade to a maximum of 45° (4).
PAGE 10
POWX221 EN 8.2 Lengthwise sawing with a(vertical) mitre This method is practically the same, except that the saw blade is placed at the angle required. With this type of method the fence may only be along the righthand side of the sawblade. 8.3 Lengthwise sawing of narrow workpieces. Assume that this process is extremely dangerous. Take all the necessary safety measures and continually push the workpiece through (until behind the saw blade) using a synthetic aid instead of by hand. 8.
PAGE 11
EN POWX221 9.2 Lubrication  The machine requires no additional lubrication. 10 TROUBLE SHOOTING In the case that the machine is not functioning properly, we give a number of possible causes and appropriate solutions below. 1. The engine does not start  The plug is not in the mains.  The cable has been interrupted. 2. The workpieces is jamming against  The saw blade must be aligned (Fig. E). the riving knife during processing 3. The saw cut is not smooth (frayed)  The saw blade must be sharpened.
PAGE 12
POWX221 EN 13 SERVICE DEPARTMENT   Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 14 STORAGE     Thoroughly clean the whole machine and its accessories.
PAGE 13
EN POWX221 16 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. 17 DECLARATION OF CONFORMITY VARO N.V.