User Manual

ManualsBrandsPowerplus ManualsWater equipmentPOWXG9007 HIGH PRESSURE CLEANER 196CC EN

POWXG9007

P a g e | 1

www.varo.com

APPLIANCE .................................................................................... 3

DESCRIPTION ................................................................................ 3

PACKAGE CONTENT LIST ............................................................ 3

SYMBOLS ....................................................................................... 4

GENERAL POWER TOOL SAFETY WARNINGS ......................... 4

5.1

Working environment ............................................................................................ 4

5.2

Personal safety ...................................................................................................... 4

5.3

Correct use and care ............................................................................................. 5

STANDARDIZED SAFETY WARNINGS FOR GASOLINE HIGH

PRESSURE WASHERS .................................................................. 6

SAFETY WARNINGS GASOLINE .................................................. 6

SAFETY FEATURES ...................................................................... 6

8.1

Thermal relief valve ............................................................................................... 6

8.2

Safety lock off latch ............................................................................................... 6

ASSEMBLY INSTRUCTIONS ......................................................... 7

9.1

Attach handle and hook ........................................................................................ 7

9.2

Installing the wheels .............................................................................................. 7

9.3

assembly of the bobbin ........................................................................................ 7

9.4

Assembling the bobbin lock ................................................................................. 7

9.5

Using the bobbin lock ........................................................................................... 8

BEFORE OPERATION ................................................................... 8

10.1

Add oil to the engine crankcase ........................................................................... 8

10.2

Add fuel to fuel tank .............................................................................................. 8

10.3

Connect high pressure hose to spray gun and pump. ........................................ 9

10.4

High pressure lance safety lock ........................................................................... 9

10.5

Connecting the hose ............................................................................................. 9

10.6

Adjusting the spray pattern ................................................................................ 10

10.6.1

0° nozzle (colored red) ........................... ................................................................ 10

10.6.2

15° nozzle (colored yellow) ....................... ............................................................. 10

10.6.3

40° nozzle (colored white) ........................ .............................................................. 10

10.6.4

Low pressure nozzle (colored black) ...................................................................... 10

Summary of content (18 pages)

PAGE 1
POWXG9007 EN 1 APPLIANCE .................................................................................... 3 2 DESCRIPTION ................................................................................ 3 3 PACKAGE CONTENT LIST............................................................ 3 4 SYMBOLS ....................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 5.1 Working environment ................
PAGE 2
POWXG9007 EN 10.7 Connect the nozzle .............................................................................................. 11 10.8 Using the detergent facility ................................................................................. 11 11 OPERATING INSTRUCTIONS ..................................................... 11 11.1 Pressure washer location.................................................................................... 11 11.2 Start-up procedure .......................
PAGE 3
EN POWXG9007 GASOLINE PRESSURE WASHER POWXG9007 1 APPLIANCE Your gasoline high pressure cleaner has been designed for outdoors cleaning. Cleaning of: machines, vehicles, structures, tools, facades, terraces, gardening tools,… Danger! Risk of injury! Follow the respective safety regulations when operating at gas stations or other dangerous areas. Please do not let mineral oil contaminated waste water reach soil, water or the sewage system.
PAGE 4
EN POWXG9007 Gun Shelf Assembly (1set) Operating Instruction manual (1) Manual of Engine (1) If any parts are missing or damaged, please contact your dealer. 4 SYMBOLS Warning danger The jet must not be directed at persons, pets, live electrical equipment or the appliance itself. Read manual before usage! Engine will not start or will shut down if the oil level is low. Flammable, do not smoke near the pressure washer.
PAGE 5
POWXG9007 EN Remove the spark plug or cable from the spark plug to prevent accidental starting. When not in use, or prior to detaching the high pressure hose. Do not ware loose clothing, jewellery or anything that may be caught in the engine. Keep pets, children and bystanders a safe distance away from your work area. A minimum of 50 feet is recommended. Never point or aim the gun at yourself or anyone else. Never put your hand, fingers or body directly in front of the spray nozzle.
PAGE 6
EN POWXG9007 − − − − Avoid fuel spills and never refuel while the pressure washer is running. Avoid an ignition source when refuelling. Use unleaded free fuel Do not use damaged high-pressure hose. 6 STANDARDIZED SAFETY WARNINGS FOR GASOLINE HIGH PRESSURE WASHERS WARNING: This appliance has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance.
PAGE 7
EN POWXG9007 9 ASSEMBLY INSTRUCTIONS Remove all packaging materials from the unit. Check the main unit, its components and all accessories for loss and transport damages. 9.1 Attach handle and hook Attach the handle (picture 1, part 1) and accessory tray (picture 1, part 8)to the frame of the pressure washer. Insert carriage bolts (picture1, part 9) through holes from outside of unit and attach a knob from inside of unit. Tighten by hand. Fit the lance hook (picture 1, part 6) to the upper handle 9.
PAGE 8
EN POWXG9007 9.5 Using the bobbin lock 1. Lock Pull the lock pin and rotate to the position where the pull ring can get into the lock pin seat. Then release, and let the lock pin into the howl on the bobbin. 2. Unlock Pull the lock pin out of the lock pin seat and rotate about 90°, then release. 10 BEFORE OPERATION To prepare your pressure washer for operation, you will need to perform these tasks: Add oil to engine crankcase. Add fuel to fuel tank. Connect high pressure hose to spray gun and pump.
PAGE 9
POWXG9007 10.3 EN Connect high pressure hose to spray gun and pump. Fit the lance to the gun (picture 1, part 4). Grip the end of the gun and screw the lance onto the gun ensuring it is tight. Do not over tighten as this could damage both the connectors. Connect the high pressure hose connector to the connector on the underside of the gun assembly ensuring that it is tight. Do not over tighten as this could damage both the connectors. 10.
PAGE 10
POWXG9007 EN Connect the high-pressure hose to the delivery pipe outlet (picture 3, part 21). Turn on the water supply and squeeze the gun trigger (picture 1, part 4) until the water flows in a steady stream through the lance. Do not use water which exceeds 40°C. 10.6 Adjusting the spray pattern Warning: Always ensure that the wand is fixed correctly. Otherwise it could be injected under high pressure when operating the gun, possibly causing injury or damage.
PAGE 11
POWXG9007 10.7 EN Connect the nozzle Connect the nozzle to the lance using the quick release connector this allows the quick and easy changing of nozzles. To connect a nozzle slide the collar back towards the gun, push the nozzle into the end of the lance. Release the collar to lock the nozzle into position. To disconnect a nozzle slide the collar back towards the gun, the nozzle can now be removed. Note: please be sure that you crosscheck the correct connection of the nozzle.
PAGE 12
POWXG9007 EN Locate the machine in a way, that the operator has easy access to the pressure washer and its controls. Locate the machine so that it is protected from external damage. To prevent damage and excessive hose wear; locate the pressure washer so that the hose does not cross traffic areas. 11.2 Start-up procedure Remove all dirt or foreign matter from the gun outlet and the male connector. Insert the nozzle into the gun. Start engine.
PAGE 13
EN POWXG9007 When the engine has been successfully started and is running smoothly return the choke lever (picture 2, part 19) to the OFF position When the engine is running, the speed can be adjusted by moving the throttle control lever (picture2, part 18). When you slide the throttle to the right, the engine will have a lower rotation speed. To obtain a higher rotation speed you have to slide the throttle more to the left. 11.
PAGE 14
EN POWXG9007 12 TECHNICAL DATA MOTOR Maximum torque at 3600 min-1 Operating Speed Fuel tank Fuel Engine Type Starting System Displacement WATER CONNECTION Max. feed temperature Min. feed volume Min. feed pressure Max. feed pressure Inlet hose length Inlet hose diameter (inner diameter) PUMP Working pressure Flow rate Oil quantity - pump Oil type – pipe engine oil Detergent suck Max. recoil force of hand spray gun DIMENSIONS AND WEIGHTS Length x width x height Weight without accessories 4.
PAGE 15
POWXG9007 EN 14 CLEANING AND MAINTENANCE 14.1 Clearing a blockage WARNING: Before checking, adjustments, cleaning or maintaining the pressure washer, the engine must be stopped and cooled down. Ensure, that the pressure is released completely If at any time the flow rate reduces splutters or is inconsistent release the trigger and switch “OFF” the machine. Squeeze the trigger to relieve any pressure and check the jet in the end of the lance for any blockage.
PAGE 16
EN POWXG9007 14.2.3 Air filter After every 100 hours of running or every month, the air filter(picture 1, part 10) should be removed, examined for deterioration and cleaned. Clean the air filter thoroughly using environmentally friendly water based degreasing agent. Allow to dry fully then replace the air filter. Warning! Never run the engine without the air filter fitted. 14.2.4 Fuel tank filter After every 150 hours of running or every three months the fuel tank filter should be removed and cleaned.
PAGE 17
EN POWXG9007 17 TROUBLE SHOOTING PROBLEM Fluctuating pressure Water leaking from pump The pump does not reach the required pressure CAUSE Pump sucking in air Valves dirty, worn out or seized Blocked jet ACTION Check connections are tight. Remove blockage using jet cleaning tool Seals worn out Contact customer helpline Pump sucking air from connections or hose Check tightness of all connections Clear or replace valves.
PAGE 18
EN POWXG9007 We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.