User Manual

POWXG9007

P a g e | 12

www.varo.com

 Locate the machine in a way, that the operator has easy access to the pressure washer

and its controls. Locate the machine so that it is protected from external damage.

 To prevent damage and excessive hose wear; locate the pressure washer so that the

hose does not cross traffic areas.

11.2 Start-up procedure

 Remove all dirt or foreign matter from the gun outlet and the male connector.

 Insert the nozzle into the gun.

 Start engine.

Warning: lf the wand is not securely locked into place. It could be injected under high pressure

when operation the gun, possibly causing injury or damage.

11.3 Start engine

Turn the fuel lever (picture 2, part 20) to the ON

position.

Set the choke lever (picture 2, part 19) to the ON

position.

Turn the engine ON/OFF switch (picture 3, part

26) to the ON position

Hold down the engine firmly with one hand on the

frame. With the other hand grip the recoil starter

cord (picture 1, part 16) handle and pull slowly

until resistance is felt indicating that the recoil

starter (picture 1, part 17) is engaged. When

resistance is felt pull the cord sharply. Continue

this procedure until the engine starts.