User Manual

ManualsBrandsPowerplus ManualsPumpsPOWXG9447 GARD EN PUMP 1200W SS EN

POWXG9447 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION (FIG A) .................................................................... 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 3

5 SPECIFIC SAFETY WARNINGS ..................................................... 3

6 ASSEMBLY ...................................................................................... 3

6.1 Electrical connection .............................................................................................. 3

6.2 Assembly of the “Press Controll” (POWXG9447 only) ........................................ 3

6.3 Earth ........................................................................................................................ 4

7 OPERATION ..................................................................................... 4

7.1 Pressure hose ......................................................................................................... 4

7.2 Safety requirements ................................................................................................ 4

8 CLEANING AND MAINTENANCE ................................................... 5

8.1 Cleaning................................................................................................................... 5

8.2 Cleaning of the built-in filter. .................................................................................. 5

9 TECHNICAL DATA .......................................................................... 6

10 NOISE ............................................................................................... 6

11 TROUBLE SHOOTING .................................................................... 7

12 INSTRUCTIONS FOR USE POWXG9447 EDWC ........................... 8

13 WARRANTY ..................................................................................... 8

14 ENVIRONMENT ............................................................................... 9

15 DECLARATION OF CONFORMITY ................................................ 9

Summary of content (9 pages)

PAGE 1
POWXG9447 EN 1 APPLICATION .................................................................................. 2 2 DESCRIPTION (FIG A) .................................................................... 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 3 5 SPECIFIC SAFETY WARNINGS ..................................................... 3 6 ASSEMBLY ............
PAGE 2
EN POWXG9447 PRESSURE PUMP 1200W POWXG9447 1 APPLICATION POWXG9447,these electrical waterpumps/pressure pumps with “press control” and/or pressure tank are only to be used indoors. These are not designed for commercial use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 3
POWXG9447 EN 4 SYMBOLS In this manual and/or on the machine the following symbols are used: In accordance with essential Denotes risk of personal safety standards of applicable injury or damage to the tool.
PAGE 4
POWXG9447 EN 6.3 Earth The water pump must be well earthed. Short-circuiting will render the relevant articles of the guarantee invalid. If it is necessary to increase the length of the original cable, a cable with the same section as the original cable must be used. 7 OPERATION The pumps are not self-priming pumps. This means that the suction hose should first of all be fitted with: 1. Non-return valve with filter; this ensures that, after disconnecting the pump, the hose and the pump do not run dry.
PAGE 5
EN POWXG9447    The pump must not run dry, as this will cause irreparable damage. Always disconnect the pump from the mains supply before cleaning or maintenance. Clean the chambers from time to time, rinsing them with clean water, to ensure they are not clogged with dirt. 8 CLEANING AND MAINTENANCE Attention !Before performing any work on the equipment, pull the power plug. 8.1 Cleaning Under normal conditions, the water pump is free of maintenance.
PAGE 6
POWXG9447 EN 9 TECHNICAL DATA Model Rated Voltage Rated Frequency Rated Power Rated pressure Max. suction height Int. protection Degree Max water temp Lift height Cable length Liq. Debit (capacity) Min. diameter of suction hose Min. diameter of pressure hose Contents pressure tank Material pump housing / Tank Weight Suitable for POWXG9447 230V 50Hz 1200W 0,5 mPa –5 bar 7m IPX4 35°C 50m 1,2 m 3800 l/hour 1” (25mm) ¾” (20mm) / SS / 12.
PAGE 7
EN POWXG9447 11 TROUBLE SHOOTING PROBLEM The electric motor is running but the pump does not suck water POSSIBLE CAUSE 1. After the pump starts, the pump body does not fill with water SOLUTION 1. Fill the pump with water 2. Insufficient tightness of the suction hose 2. Check the recommended and used pans and components of the pump, e.g. joint of the suction nose, joint of the pressure hose, clamping ring, suction hose, etc., including screw sealing strip made from Teflon or hemp cord.
PAGE 8
POWXG9447 PROBLEM The heat-sensitive switch cannot switch-off the pump The switch of the pump is always OFF or ON Frequent switching ON/OFF of the pump switch (when used for household water supply system) EN POSSIBLE CAUSE 1. Over-load of the electric motor due to friction caused by impurities entering the motor 1. No non-return valve installed on the suction hose 1. Rupture of the rubber envelope in the pressure tank SOLUTION 1. Wash the shell of the pump with pressured water 2.
PAGE 9
EN POWXG9447  Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase. 14 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish.