Use and Care Manual

ATTACH LOWER & UPPER HANDLE

1. Take lower handle and line up the hole in the lower handle with the hole on the handle bracket. Make

sure Left lower handle to left side of the mower, Right lower handle to right side of mower.

2. Secure the lower handle with Sleeve with provided M6 Hexagonal flange bolts on each side.

3. Pull upper handle up and lock it in position with bolts and knob on both side. Make sure engine

star/stop control is on top.

4. Lock the cable to the handle using cable clip

5. Insert the recoil starter handle cable into the hook provided on the upper handle. You must engage the

start/stop control to release the recoil starter handle.

Knob and screw

flange bolt

Recoil starter handle

Cable Clip