Instructions / Assembly

3
CONTENTS
Technical data…...………………………………………………………... 3
General safety rules…….………………………………………………... 4
Specific safety rules for drill press……...………………………………. 5
Electrical information…………………………………………………...... 6
Knowing your drill press……...………………………………………… 8
Assembly and adjustments……………………………………………… 9
Maintenance.…………………………………………………………… 14
Troubleshooting.………………………………………………………... 15
Exploded view & parts list……………………………………………… 16
Warranty………………………………………………………………… 18
TECHNICAL DATA
10 Inch 12 Speed Drill Press with Laser Guide Model # PS310
Motor: 120V, 60 Hz, 3.85A, 3/5HP
Swing: 10"
Spindle travel: 2-3/8"
Chuck capacity: 5/8"
Table size: 7-3/4" x 7-3/4"
Table tilt: 0-45º Left and Right
Spindle speeds: 12(300/370/470/570/630/690/950/
1400/1620/1760/2550/2900RPM)
Spindle taper: B16
Base size: 13-1/8" x 8"
Overall height: 27-1/2"
Weight: 46.2 lb.
Warning! We strongly recommend that this item not be modified and/or used for any application
other than that for which it was designed. If you have any questions relative to its application, do not
use the equipment until you have consulted us and we have advised you.
Contact PowerSmart at [phone] M-F 9am-5pm EST
Thank you for purchasing PowerSmart products. Please register online at
www. PowerSmartUSA. com
The information will allow us to track your warranty and update on your unit.
Important: Our company does not provide email or personal information to any third party for any
reason. For any questions check our website or call customer service at [phone].