Instructions / Assembly

14
7. Make sure the saw blade (13) can turn freely by turning the blade by hand when release the spindle
lock button. Make sure counterclockwise is locking saw blade.
Fig. 7
Bevel Angle Adjustment (Fig 7)
1. Loosen the edge guide locking screw (2).
2. Slide the edge guide (C) through the slots in the base plate (14) to the desired width.
3. Tighten the edge guide locking screw (2) to secure it in the position.
4. Ensure that the edge guide (C) rests against the wood along its entire length to give a consistent
parallel cut.
WARNING: Incorrect positioning of the blade can permanently damage the tool.
Dust extraction (Fig. 8)
Fig. 8
The circular saw is a powerful tool capable of producing a large amount of dust. As the tool has a fully
enclosed blade, forced dust extraction is particularly efficient. Forced dust extraction should be used for
all but small trimming jobs.
1.Push the dust extraction，B on to the dust extraction nozzle (12).
2.Connect a vacuum device approved for the extraction of sawdust and splinters to the dust extraction
hose (B).