Use and Care Manual

10
INSTALLING THE BLOWER TUBE
CAUTION: Always ensure that the tool is switched off and the battery is removed before making any
adjustments or maintenance procedures.
Slide the small tube (C) over the big tube (B) until the latch on the big tube is inserted into the end
of the opening on the small tube and locks into position (see fig.1)
Align the widest end of the big tube (B) with the front opening on the blower (A). (see fig 2)
CONNECTING AND REMOVING BATTERY
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the blower for the first time, place the
battery pack in the battery charger and charge. Make sure to read all safety precautions, and follow the
instructions in the battery charger section.
To remove the battery pack
Press the button (1) on the battery pack down and hold (see fig.3)
Grasp the blower (2) firmly, and pull the battery pack out of the handle . (see fig 4)
To install the battery pack
Fig. 1
Fig. 2
C
B
B
A
1
Fig. 3
Fig. 4
2