User manual

28
PRECAUTIONS
A. Never unscrew or loosen up the
screws on the cover or inside the de-
vice. They have been fixed with a mi-
cro dynamometer to achieve its max-
imum performance. If you manipulate
the screws on the cover, the Thermix will
work badly. If the inner screws are tam-
pered, the thermoelectric modules will
break down inevitably.”
B. Never immerse underwater. The mica
joint that separates the hot plate from
the rest of the device is not airtight, so it
could let the water flow, and then dam-
age components inside.
C. Do not cool down suddenly, either by
immersing the base in water or by pour-
ing ice or cold water on top.
D. Do not introduce any objects in the fan.
E. The user must ensure that the heat
source used complies with the relevant
regulations of quality and safety.
F. When running for the first time, use
a small flame until the fan starts to spin.
The air that comes up from the device
dispels the heat from the flame towards
the handle. If you use a big flame and
the fan does not spin, despite the han-
dle being made of fireproof polyamide, it
could burn.
G. The surface of the appliance can be
really hot.
H. Do not allow children to use or super-
vise the device.
I. Do not place the apparatus over heat
sensitive surfaces. When removing from
the heating source, the Thermix will still
generate electricity for a few minutes,
and the fan will still spin. The inferior sur-
face will maintain a high temperature for
a few minutes.
J. Never touch people, objects or an-
imals with the Thermix when this has
been over a heat source: the tempera-
ture of the inferior plate could reach
400
o
C that could provoke serious burns
and acute pain.