User manual

29
MAINTENANCE
If the device is going to be left outside,
place it downward, so strange objects
cannot fall over the fan blades. Before
placing it over a flame, please check that
nothing is blocking the fan blades from
spinning. To clean, use a soft cloth over
the surface.
SUGGESTIONS
Thermix can work perfectly by placing it
over hot surfaces such as a barbecue, a
hot iron, a heater or a vitroceramic hob.
In fact, it requires less heat than the one
from a direct flame given that the heat
will be dissipated regularly on the base
of the device.
Placed over a heater, and as long as the
fan starts to spin, a hot air column will be
spread over the whole room instead of
directly to the ceiling, increasing the e-
ciency of the heater and contributing to
fuel economy.
Over a vitroceramic hob the device works
amazingly well. Although it seems a non-
sense to use an electric hob to activate
an electric generator, Thermix can heat
a kitchen using this heat source if there
is no other heating device in the room.
If used over a barbecue it is better to
place it over the plate. It will provide sev-
eral square metres of light in the open air
through a simple electric installation, al-
though it is important to avoid oils and
fats which smell, when getting in contact
with the heat sink, will stay on the device
for a long time when using it.