User Guide

Open the
PowerView
App on your
iPhone or
iPad, access
the menu
and select
HomeKit
& Siri.
Select
Enable.
Select the
option to
manually
enter the
HomeKit
setup code.
Place the hub
and each window
treatment in the
appropriate room.
Follow the steps in the PowerView App to
complete the integration. You will:
a. Add your PowerView Hub and Shades to
HomeKit as accessories.
b. Synchronize all Shade, Room and Scene
data between the PowerView and Apple
Home apps.
1
2
3
5
4
© 2020 HunterDouglas. All rights reserved. All trademarks used herein are the property
of HunterDouglas or their respective owners. 11/20
Apple, iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other
countries. HomeKit is a trademark of Apple Inc.
Before You Begin:
In order to enable Apple
®
HomeKit
®
, you’ll need:
• A PowerView
®
Hub, Gen 2, updated with the latest firmware
• A HomeKit setup code (located on the bottom of the PowerView Hub)
• An iPhone
®
or iPad
®
with the latest version of iOS
• The Apple Home app downloaded and installed on your iPhone or iPad
T ips
• Use of the PowerView Remote to control PowerView shades
integrated with Apple HomeKit is not recommended. For optimal
system performance, the Apple Home app, PowerView
®
App and
Scene Controller are the recommended control options.
• Complete all Shade, Room and Scene configuration in the PowerView
App prior to enabling HomeKit and using the Home app.
• If any changes to Shade and/or Scene information are made in
the Apple Home app, you may need to confirm those changes and
resolve any conflicts the next time you open the PowerView App.
• Once HomeKit is enabled, it is recommended that the user who
added the PowerView Hub to their HomeKit home share access
with family members using the Home app. This ensures everyone
in the home can use Siri, and that all changes stay in sync.
PowerView
®
ENABLING APPLE HOMEKIT QUICK START GUIDE
Locate
the setup
code on
the bottom
of the
PowerView
Hub and
enter it as
indicated.