User's Guide Power Supply 9150

Installation

Powerware

9150 User’s Guide www.powerware.com

Screws from

UPS panel; 3 on

each side

reused for PDM

WireCover for

Output Conduit

Landing

Figure 10. Mounting the PDM to UPS Rear Panel

7. Insert the bushing (provided with the PDM packaging) into the

output conduit landing.

8. Hardwire the input (TB1-1 through TB1-4) terminations for the

UPS. See the following hardwired terminations table for

specifications. See Figure 11 for a detailed view of the terminal

blocks.

9. Insert the wires from the PDM into the output conduit landing

and connect to the UPS terminal block according to the

following table.