OPERATOR’S MANUAL & PARTS LIST Midsize Extractor Model PFX1080AW & PFX1085EAW SERIES WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. ©Tacony, Inc.
IMPORTANT SAFETY PRECAUTIONS WARNING!: To reduce the risk of fire, electric shock, or injury WARNING To avoid electric shock, DO NOT expose to rain. Store Indoors. WARNING To avoid fire, DO NOT use with a flammable or combustible liquid to clean floor. When using this upright extractor, basic precautions should always be followed, including the following: 1) DO NOT leave unit when plugged in. Unplug from outlet when not in use and before servicing.
GROUNDING INSTRUCTIONS DANGER: Improper use of the grounding plug can result in a risk of electric shock. GROUNDING INSTRUCTIONS This extractor must be properly grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This machine is equipped with 1 or 2 pigtail cords having an equipment-grounding conductor and grounding plug. The pigtails must be inserted into an appropriate 12 gauge 3 prong extension cord.
General instructions for PFX1080 series Extractors Congratulations on your purchase of a Powr-Flite extractor. You are now equipped to handle any and all commercial carpet cleaning jobs. Shipping and Damage This equipment is thoroughly inspected, tested, and packaged to provide equipment in good operating condition. It is beyond our control after the equipment is turned over to a freight carrier. The freight carrier received and signed for the equipment in good condition.
Maintenance To receive reliable service from this equipment, regular daily maintenance is a required. 1. Keep the equipment clean, both inside and out. 2. Lubricate brass quick disconnects with a quality lubricant such as WD-40®. 6. Never lift the machine by pressure regulator (on heated model). 7. Do not allow the unit to freeze! 8. The equipment was not designed to be used outdoors or in the rain. 9. Do not operate in standing water. 3. Flush solution systems after use with clear, clean water.
Storage of Equipment 1. Store extractor indoors in dry area. 2. Recovery and solution tank should be empty and clean when the extractor is not in use. 3. Leave the recovery lid and drain hose open to air out the recovery tank. 4. Do not store in freezing temperature. 5. A small amount of windshield washer fluid may be left in the pump and internal solution line for protection against freezing. Warnings 1. Do not break off or pull the grounding prong on the plug. 2.
PFX1080AW BASE ASSEMBLY PFX1080AW Parts List PFX1080AW BASE ASSEMBLY 32 33 13 30 10 27 25 35 22 20 6 16 2 1 24 23 28 12 9 34 29 4 11 26 19 5 31 14 3 17 15 DESCRIPTION PART NO. 21 18 7 ITEM 8 ITEM DESCRIPTION PART NO.
PFX1080AW solution tank assembly PFX1080AW Parts List PFX1080AW SOLUTION TANK ASSEMBLY 12 13 8 5 9 7 14 6 4 2 1 3 11 ITEM 8 10 15 DESCRIPTION PART NO. 1 SCREW 1/4-20X1/2 PHIL PAN 7BS003-BLK 2 SCREW 1/4-20X1/2 PHIL PAN 7BS003 3 FITTING NYLON ELBOW 90 DEG.
PFX1080AW Parts List PFX1080AW recovery tank assembly PFX1080AW RECOVERY TANK ASSEMBLY 27 4 10 21 26 23 6 15 8 16 3 13 1 9 22 7 25 30 24 30 17 2 29 14 5 12 ITEM DESCRIPTION 18 11 28 PART NO. 19 20 ITEM DESCRIPTION PART NO. 1 5/16-18 x 18.
PFX1085EAW Parts List W BASE ASSEMBLY PFX1085EAW BASE ASSEMBLY 35 36 13 33 18 37 10 30 27 39 24 22 26 38 6 17 2 1 ITEM 25 12 31 14 9 32 4 11 21 29 34 5 28 19 3 16 7 20 15 8 23 DESCRIPTION 10/-24 ALL THREAD 72000A 2 WASHER 5/16 SAE FLAT ZINC X8218 3 1/4” QUICK DISCONNECT PX6 4 AXLE REAR MID SIZE X9463 5 NUT 8-32 LOCK W/NYLON INSERT X8260 6 BOLT 1/4-20X 1” X8211 7 CASTER, 4” BLACK X9153 8 WHEEL 10” GRAY X9063 9 COVER FAN 72702A 10 CAT PUMP 500 PSI, A
PFX1085EAW Parts List PFX1085EAW solution tank assembly PFX1085EAW SOLUTION TANK ASSEMBLY 12 13 8 9 5 14 7 6 4 2 10 1 3 11 ITEM DESCRIPTION PART NO.
PFX1085EAW PFX1085EAW recovery tank assembly Parts List PFX1085EAW RECOVERY TANK ASSEMBLY 27 4 10 21 26 23 6 15 8 16 3 13 9 1 22 25 7 30 31 24 17 2 29 14 5 12 ITEM 12 DESCRIPTION 18 11 28 PART NO. 19 20 ITEM DESCRIPTION PART NO. 1 5/16-18 x 18.
Troubleshooting ELECTRICAL SYSTEM POSSIBLE CAUSE SOLUTION 1. Defective power cord. 1. Replace. 2. Circuit breaker off or 2. Turn circuit breaker fuse blown. on or replace fuse. Unplug any equipment using the same circuit. Switch is turned on. 1. Faulty electrical cable. 1. Repair or replace. Intermittent power to 2. Defective switches. 2. Replace. motor(s). 3. Loose terminal or dis3. Replace. colored terminal connections. Electrical Shock 1. Equipment not 1. Locate grounded grounded. outlet.
WARRANTY The manufacturer warrants to the original purchaser that products manufactured are free from defects of workmanship and material, provided such goods are installed, operated and maintained in accordance with written manuals or other instructions for a period of 5 years from date of purchase on housings and frame, 3 years on heater, 1 year on pump, 2 years on vac motor, and parts and workmanship.
