Use and Care Manual

Architectural Coatings PPG Floor & Porch Enamel Interior/Exterior 100% Acrylic Latex Satin
GENERAL DESCRIPTION PRODUCT DATA
RECOMMENDED SUBSTRATES
FEATURES / BENEFITS
Our premium acrylic Floor, Porch, and Deck Enamel is formulated to
meet the performance requirements of the residential and commercial
markets. The 100% acrylic formula provides excellent durability. It
provides excellent adhesion to multiple surfaces and is fast-drying and
scuff resistant. Ideal for properly prepared new or previously painted
horizontal wood, incidental metal, and aged concrete basement floors,
patios, breezeways, decks, steps, and porches.
Concrete
Masonry
Wood
PRODUCT TYPE: 100% Acrylic Latex
SHEEN: Satin, 10-20 @85º
VOLUME SOLIDS*: 41% +/- 2%
WEIGHT SOLIDS*: 54% +/- 2%
WEIGHT/GALLON*: 10.7 lbs. (4.9 kg) +/- 0.2 lbs. (91 g)
VOC: <50 g/L (0.4 lbs./gal.)
*Product data calculated on product 3-510XI.
COVERAGE: Approximately 300 to 400 sq. ft. (28 to 37 sq. meters) per
U.S. Gallon (3.78L) on smooth, nonporous surfaces.
Wet Film Thickness: 4.0 - 5.3 mils
Wet Microns: 102 - 135
Dry Film Thickness: 1.6 - 2.2 mils
Dry Microns: 41 - 56
Coverage figures do not include loss due to surface irregularities and
porosity or material loss due to application method or mixing. Some col-
ors, drastic color changes, or porous substrates may require more than
one coat to achieve a uniform finish.
DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.
To Touch: 1 hour
To Recoat: 4 hours
To Full Cure: 30 days
Allow 24 hours before normal use. Drying times listed may vary
depending on temperature, humidity, film build, color, and air movement.
CLEANUP: Clean tools with warm, soapy water.
DISPOSAL: Contact your local environmental regulatory agency for
guidance on disposal of unused product. Do not pour down a drain or
storm sewer.
FLASH POINT: Over 200ºF (93ºC)
PRODUCT INFORMATION
3-510XI White & Pastel Base
3-515XI Midtone Base*
3-519XI Dark Gray
3-540XI Ultra Deep Base*
*Must be tinted before use.
Refer to the appropriate color formula book, automatic tinting equip-
ment, and or computer color matching system for color formulas and
tinting instructions.
3-510XI
FLOOR & PORCH ENAMEL 3-510XI Series
Read Label and Safety Data Sheet prior to use. See other cautions on last page.
Features Benefits
100% acrylic latex Excellent durable finish
Excellent adhesion Sticks to difficult substrates
Scuff resistant Less scuff marks on the surface
Fast drying Recoat in as little as four hours
Good flow and leveling Smoother final appearance
CONFORMANCE STANDARDS
VOC compliant in all regulated areas
1-Gallon (3.78 L)
5-Gallon (18.9 L)
Not all products are available in all sizes.
PACKAGING