Operating Instructions

Exposure time
The exposure time can be set before or after cocking shutter. Setting exposure time on the scale (13) is possible in
both directions. To avoid unintentional missetting, the scale clicks in at the red triangular mark. It is not possible to
set intermediate values.
Release button and self-timer
You may lock the release button (4) by turning the lower knurled ring (17). The red mark shall point upwards. Cock
the self-timer by swiveling the cocking lever (5) by about 90 degrees; let it run down by actuating the release button
(4). Remember to cock the shutter before. The running time of the self-timer is about 10 seconds. It can be used with
all shutter speeds.