Product Manual
PARTS LIST FOR LAWN ROLLERS:
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE. CALL US AND WE
WILL TAKE CARE OF ANY PROBLEM YOU MIGHT HAVE WITH THIS PRODUCT.
Phone (800) 225 - 5891 EXT. #204
HOW TO ORDER
REPLACEMENT PARTS:
When ordering parts always
give model number, part
number and part description.
Send To: Parts Division
316 Limit Street
Lincoln, IL 62656
TIP: Many of these
hardware parts can be
purchased at your local
hardware store.
Qty
1
1
4
2
8
4
1
2
2
1
1
2
2
1
2
1
1
1
Ref
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Parts
No
3263
1956
1646
2576
3039
1974
3264GY
3265GY
3255
3254
3256
1806
3257GY
1042
3042
3268
3266
2311
Description
Roller Body
Expansion Plug
5/8” Flat Washer
3/16” Cotter Pin
3/8” Lock Nut
3/8” x 1” Hex Head Bolt
Center Brace
Hitch Side Bar
3/8” x 2-1/4” Hex Head Bolt
3/8” x 3/8” Spacer
Clevis Pin 1/2” x 2-1/4”
3/8” x 1-1/2” Hex Head Bolt
Clevis Plate
#14 Hitch Pin Clip
1” Handle Grip
1/2” x 2-1/2” Hex Head Bolt
Handle Tube
1/2” Lock Nut
1
PLR1824 Parts List
Phone (800) 225-5891
(217) 735-1590 Ext. 204
FAX (217) 735-2435
PLR1824
PLR1836
PLR1824
Precision Pro Plastic Lawn Roller
PLR1836
3
3
4
4
6
6
5
7
9
12
8
10
5
13
5
11
14
Handle Components – PLR1824 ONLY!
2
15
16
17
15
18
Qty
1
1
4
2
8
4
1
2
2
1
1
2
2
1
Ref
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Parts
No
3250
1956
1646
2576
3039
1974
3251GY
3252GY
3255
3254
3256
1806
3257GY
1042
Description
Roller Body
Expansion Plug
5/8” Flat Washer
3/16” Cotter Pin
3/8” Lock Nut
3/8” x 1” Hex Head Bolt
Center Brace
Hitch Side Bar
3/8” x 2-1/4” Hex Head Bolt
3/8” x 3/8” Spacer
Clevis Pin 1/2” x 2-1/4”
3/8” x 1-1/2” Hex Head Bolt
Clevis Plate
#14 Hitch Pin Clip
PLR1836 Parts List
3258
3/04
Tools Required for Assembly:
1- Pair of Pliers
2 - 9/16” Wrenches
2 - 3/4” Wrenches
Precision Products, Inc.Precision Products, Inc.
STEP 1
Place a 5/8” Flat Washer (3) over the
axle on the Roller Body (1). Do this for
both ends of the Roller Body. Fig. 1
Next, place one end of the Center Brace (7)
over one side of the axle then the opposite
side. NOTE: you will have to pull (spread out)
on one end of the Center Brace to get it to go
over the axle. Fig. 2
Place another 5/8” Flat Washer (3) over
the axle on the Roller Body (outside the
Center Brace) on each end. Fig. 1
Insert a 3/16” Cotter Pin(4) into the hole
on the axle and spread the legs of the pin
to secure into place. Repeat this procedure
for the other side of the axle. Fig. 1
Figure 1
Figure 2
3
3/16” Cotter
Pin
5/8” Flat Washers
Center
Brace
Roller Body Axle
Roller Body
Center
Brace
Pull
(spread out)