Installation manual

AM3-B
Page - 10 - Installation Manual
Nose Piece Orientation
Rotate Nose 180°
counter-clockwise
Left Hand Orientation
Figure 7
Right Hand Orientation
Back Side of Nose Piece Front Side of Nose Piece
Figure 8
1. Once the mount has been oriented and mounted to the wall, remove the nose piece by removing the
tensions bolts.
NOTE: After loosening the tension bolts, be sure that the nose piece is held together tightly before
rotating.
2. Detach the nose piece assembly, rotate 180°, and place back onto the mount (Figure 7).
3. Slide the tension bolt back into the holes and attach the nuts from the backside of the nose assembly.
Tighten the tension bolts. (Figure 8).
Tension Bolts