User's Manual

Welcome to the world of the new generation of CB radios. The

new PRESIDENT range gives you access to top performance

CB equipment. With the use of up-to-date technology, which

guarantees unprecedented quality, your PRESIDENT ANDY USA

12/24 V is a new step in personal communication and is the

surest choice for the most demanding of professional CB radio

users. To ensure that you make the most of all its capacities,

we advise you to read carefully this manual before installing

and using your PRESIDENT ANDY USA 12/24 V.

A) INSTALLATION

1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO

a) You should choose the most appropriate setting from a simple and

practical point of view.

b) Your CB radio should not interfere with the driver or the passengers.

c) Remember to provide for the passing and protection of different

wires (e.g. power, antenna, accessory cabling) so that they do not

in any way interfere with the driving of the vehicle.

d) To install your equipment, use the cradle (1) and the self-tapping

screws [2] provided (drilling diameter 3.2 mm). Take care not to

damage the vehicle’s electrical system while drilling the dash board.

e) Choose where to place the microphone support and remember that

the microphone cord must stretch to the driver without interfering

with the controls of the vehicle.

f) Choose where to place the microphone support and remember that

the microphone cord must stretch to the driver without interfering

with the controls of the vehicle.

- Note: As the transceiver has a frontal microphone socket, it can be

set into the dash board. In this case, you will need to add an exter-

nal loud speaker to improve the sound quality of communications

(connector EXT.SP situated on the back panel: C). Ask your dealer

for advice on mounting your CB radio.

MOUNTING DIAGRAM

EnglishEnglish

Andy ASC AM 12_24 V 4 langues US_v1.01.indd 5 04/05/2017 09:17:32