User Manual
3.0 Connecting to a Computer or iOS Device
3.4 Windows PreSonus Driver Control Panel
AudioBox
™
iOne and iTwo
Owner’s Manual
15
• Sample Rate Selector. Lets you set the sample rate to 44.1, 48, 88.2, or 96 kHz.
Although a higher sample rate results in better recording quality, it does increase
the le size and the amount of system resources needed to process the audio.
Power User Tip: Changing the sample rate will produce a momentary popping
noise. Because of this, it is recommended that you turn the Main and Phones
volumes down on your AudioBox prior to changing the sample rate.
• ASIO Buer Size. Allows you set the buer size from 64 to 2,048 samples.
Power User Tip: You should set your buer size prior to launching your host application.
Setting your buer size to 64 or 128 may have a performance eect on your computer.
The buer size determines the roundtrip time it takes audio data to
be converted from analog to digital and back to analog. As a general
rule, the higher the buer size, the better the system performance, but
the less playable virtual instruments and the like become.
In general, 512 samples (11 to 12 milliseconds) will provide you
with a large enough buer for optimum system performance but
small enough to minimize latency and be unobtrusive.