User Manual
4.0 Studio One Artist Quick Start
4.2 Enabling the Audio Driver
AudioBox
™
iOne and iTwo
Owner’s Manual
19
3. Click on the “Download License” link.
A le called “Studio One 2 Artist.license” will be saved to your computer.
Copy this onto a piece of removable media and then transfer it onto
the computer on which you want to run Studio One Artist.
4. Launch Studio One Artist.
Go to the Activate Studio One Menu and click “Activate Oine.”
5. Drag the “Studio One 2 Artist.license” le onto the Oine
Activation window to complete the activation.
Installing Bundled Content for Studio One Artist
Studio One Artist comes bundled with more than 6 GB of
plug-ins, loops, and samples, as well as an array of demo and
tutorial material and other third-party content.
Once you’ve completed the Studio One Artist installation and
activation process, the Studio One Content Installer will appear.
1. Click on “Install content from My PreSonus user account.”
2. At the top of the installation menu, select the location where you wish to install the
content. Listed in the installation menu are separate entries for each available item.
Click the check box next to each item you wish to install, then click on the Install
Packets button at the bottom left of the menu to install the selected content.
When nished installing content, click on the Done button to exit the menu.
Power User Tip: If you choose not to install any portion the Studio
One Artist content, you can install at any time in the future by
going to the Studio One >Studio One Installation... menu.
4.2 Enabling the Audio Driver
Studio One Artist was designed with PreSonus interfaces in mind,
so setting up your AudioBox iOne or iTwo is quick and easy.
Start Page: Setup Area
Selecting a Dierent Audio Driver from the Start Page
If you don’t see the correct driver for your interface (“PreSonus
AudioBox iTwo” or “PreSonus AudioBox iOne”) on the Start page
when you launch Studio One, click the Congure Audio Devices link
in the Setup area to open the Audio Setup Options window.
In the Audio Device menu, select the correct driver for your PreSonus
AudioBox interface and then click the Apply and OK buttons.
After you have veried that the correct PreSonus AudioBox driver has been detected,
please continue to the next section to set up your external MIDI devices. If you
don’t have any MIDI devices to connect at this time, please skip to Section 4.4.