User Manual

2.0 Hookup
2.2 Rear-Panel Connections
AudioBox
™
iOne and iTwo
Owner’s Manual
6
Main Output Knob. This knob controls the signal level for the Main outputs on the
back of the interface.
Power LED. This LED illuminates in blue when the interface is properly powered and
synced to a connection on you computer or iPad.
Please Note: If your AudioBox interface isn’t properly synced, the LED
will continue ashing blue until proper synchronization is achieved.
2.2 Rear-Panel Connections
Kensington Security Slot. This connector can be used with a Kensington®-style
security lock to protect your AudioBox iOne or iTwo from possible theft.
USB 2.0/Power Port. This is for connecting your interface to an available USB port on
your computer with the included USB cable. Because the AudioBox iOne and iTwo
are bus-powered via this connection, they don’t require an external power supply.
This port also provides power to the interface when used with an iPad.
Simply use the included USB cable connected to a compatible 5V, 2.1A
(2,100 mA) USB power supply, such as the one from an iPad.
Power User Tip: AudioBox iOne and iTwo are compatible with all USB 2.0 and 3.0 ports.
Device Port. This lets you use an Apple-compatible 30-pin or Lightning-to-USB cable
to connect your AudioBox to an iPad when recording and playing back from audio
applications. (We recommend using the cable included with the iPad, as results may
vary with non-Apple cables.) See iOS Devices for minimum system requirements.