Technical information

PreSonus AudioBox

™

USB

Overview Hookup Connecting

to a

Computer

Tutorials Technical

Information

Troubleshooting

and Warranty

4 Studio One Artist

Studio One Artist

4.5 Creating Audio Tracks

1. In the upper left corner of the Arrange window, you will

notice several buttons. The third button from the left is

the Add Tracks button. Click this button to bring up the

Add Tracks window.

2. In the Add Tracks window, you can select the number

and type of tracks you’d like to create (Mono Audio,

Stereo Audio, Folder, Instrument, or Automation) and

can customize the track name and color as well as add a

preset rack of eﬀects to the track.

3. Once you have added your tracks, you can assign the

input by simply clicking on the input to which a track is

currently assigned. This will bring up the inputs list. You

can also access the audio I/O setup from here.

4. If you would like to add a track for each of the available

inputs and have the routing automatically assigned,

simply go to Track | Add Tracks for All Inputs.

5. To begin recording, create an audio track, assign it

to Input 1, and connect a microphone to the ﬁrst

channel on the AudioBox USB. Select Record Enable

on your track in Studio One Artist. Turn up the Channel

1 level while speaking/singing into the microphone.

You should see the input meter in Studio One Artist

react to the input. Adjust the gain so the input level

is near its maximum without clipping (distorting).

6. Connect a set of headphones to the AudioBox

headphone output. If you wish to listen to your

AudioBox USB with studio monitors, make sure to

connect them to the AudioBox‘s Main outputs.

You are now ready to record. For complete

instructions, please consult the Studio One

Reference Manual, which is located on your

Studio One Artist installation DVD.