User Manual

OPERATION
13
2.3.3 Input LED Meter Modes
• +4 dBu
References 0 dBVU to +4 dBu.
0 dBVU should reference +4 dBu if any of your monitoring
devices have a maximum input of +4 dBu or if none of your
input devices have a maximum (or nominal) output level
greater than +4 dBu.
• +10 dBu
The default LED meter reference level: 0 dBVU = +10
dBu.
0 dBVU should reference +10 dBu if any of your monitoring
devices have a maximum input of +10 dBu or if none of
your input devices have a maximum (or nominal) output
level greater than +10 dBu.
• +18 dBu
References 0 dBVU to +4 dBu.
0 dBVU should reference +18 dBu if any of your monitoring
devices have a maximum input of +18 dBu or if none of
your input devices have a maximum (or nominal) output
level greater than +18 dBu.
2.3.4 Reset All Modes to Factory Default
• Factory Reset
References 0 dBVU to +4 dBu.
0 dBVU should reference +4 dBu if any of your monitoring
devices have a maximum input of +4 dBu or if none of your
input devices have a maximum (or nominal) output level
greater than +4 dBu.