User Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 Product Registration
- 1.3 What’s in the Box
- 2 Hookup
- 2.1 Rear Panel Connections and Controls
- 2.1.1 Inputs
- 2.1.2 Power
- 2.1.3 Acoustic Tuning Controls
- 2.2 Hookup Diagrams
- 2.2.1 Basic Setup
- 2.2.2 Advanced Setup with Monitor Controller and Speaker Switching
- 3 Application Guide
- 3.1 Monitor Placement and Acoustic Space Settings
- 3.2 Calibrating Using 85 dB SPL “Standard” Reference
- 4 Resources
- 4.1 Technical Specifications
- 4.2 Troubleshooting
11
4 Resources
4.1 Technical Specications
R-Series R65 V2 and R80 V2
Owner’s Manual
4 Resources
4.1 Technical Specications
IINPUTS (R65 V2 and R80 V2)
1 - Balanced XLR
1 - Balanced ¼” TRS
1 - Unbalanced RCA
PERFORMANCE
Frequency Response (-3 dB)
R65 V2 45 Hz – 22 kHz
R80 V2 40 Hz – 22 kHz
Crossover Frequency
R65 V2 2.7 kHz
R80 V2 2.6 kHz
LF Amplifier ower
R65 V2 and R80 V2
Class A/B, 75W
HF Amplifier ower
R65 V2 and R80 V2
Class A/B, 65W
Peak SPL at 1M
R65 V2 104 dB
R80 V2 107 dB
LF Driver
R65 V2 6.5” Woven composite
R80 V2 8” Woven composite
HF Driver (R65 V2 and R80 V2)
Type AMT
Diaphragm 6.8 in2 (4400 mm2)
Equivalent Diaphragm ø 3” (76 mm)
Input Impedance (R65 V2 and R80 V2)
Balanced 20 kΩ
Unbalanced 10 kΩ
USER CONTROLS (R65 V2 and R80 V2)
Volume Range
Type A-type taper
HF Control
Settings +/- 6dB shelf @ 10kHz