User Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 Product Registration
- 1.3 What’s in the Box
- 2 Hookup
- 2.1 Rear Panel Connections and Controls
- 2.1.1 Inputs
- 2.1.2 Power
- 2.1.3 Acoustic Tuning Controls
- 2.2 Hookup Diagrams
- 2.2.1 Basic Setup
- 2.2.2 Advanced Setup with Monitor Controller and Speaker Switching
- 3 Application Guide
- 3.1 Monitor Placement and Acoustic Space Settings
- 3.2 Calibrating Using 85 dB SPL “Standard” Reference
- 4 Resources
- 4.1 Technical Specifications
- 4.2 Troubleshooting
5
2 Hookup
2.2 Hookup Diagrams
R-Series R65 V2 and R80 V2
Owner’s Manual
Acoustic Space. Cuts the level of all frequencies below 800 Hz by either -4 dB or -2
dB to compensate for the bass boost that naturally occurs when a speaker is placed
near a wall or a corner. If your R-Series monitors can be placed away from the walls in
your mix space, leave this control set to 0 dB.
Power User Tip: The closer your studio monitors are to a wall or a corner, the more the
boundary bass will be boosted. If you notice your mixes lack low end when played away
from your mix environment, try adjusting the Acoustic Space to create a more even
frequency response and help to mitigate a compact mix position. For more information
on studio monitor placement, please review Section 3.1.
2.2 Hookup Diagrams
2.2.1 Basic Setup
R65 V2 R65 V2
Quantum