Use and Care Guide

INSTALLATION GUIDE & WIRING DIAGRAM
Installation of Internal Blower Kit (IBPC600 600CFM)
1.) Remove shipping bracket from hood. DO NOT DISCARD SCREWS.
2.) Install blower bracket with the screws removed from the shipping bracket.
3.) Locate the terminal block inside the electrical supply box.
4.) Connect Fan #1 wire (RED) to terminal block #4.
5.) Connect Fan #1 wire (BLACK) to terminal block #6.
6.) Connect the 115 volt supply wire (WHITE) to terminal block #2.
7.) Connect the 115 volt supply wire (BLACK) to terminal block #1.
Installation of Internal Blower Kit (IBPC1200 1200CFM)
1.) Remove shipping bracket from hood. DO NOT DISCARD SCREWS.
FOR FAN # 1
2.) Install blower bracket with the screws removed from the shipping bracket.
3.) Locate the terminal block inside the electrical supply box.
4.) Connect Fan #1 wire (RED) to terminal block #4.
5.) Connect Fan #1 wire (BLACK) to terminal block #6.
6.) Connect the 115 volt supply wire (WHITE) to terminal block #2.
7.) Connect the 115 volt supply wire (BLACK) to terminal block #1.
FOR FAN # 2
8.) Connect Fan # 2 wire (RED) to terminal block #3.
9.) Connect Fan # 2 wire (BLACK) to terminal block #5.
- 8 -