Use and Care Guide

INSTALLING THE WALL HOOD DUCT COVER
1.) Measure from top of the canopy to ceiling and subtract 1/8” (0.3 cm) for clearance.
2.) Place the duct cover top inside the duct cover base and lower until desired height is found. (To
eliminate scratches, make a mark on the duct cover top for the desired lowering point by subtracting
15” from the total height needed.)
3.) Use the retaining screws to fasten in place.
4.) Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided.
5.) NOTE: For installations with ceilings above 9’ (22.9 cm), use optional custom ues. See product
literature for details.
Model
PC3024
PC3624
PC4224
PC4824
“A” Minimum
15”
15”
15”
15”
“B” Maximum
12”
12”
12”
12”
“C”
12”
12”
15”
18”
- 10 -