Operating Instructions

USER MANUAL | MultiPad 7.0 Prime DUO/PMP5770D DUO
6
2
2. Getting Started
2.1 Charging the battery
Prestigio MultiPad comes with a built-in polymer rechargeable battery and is designed to use only
manufacture-specified original batteries and accessories. You can see battery status on status bar of
MultiPad in the lower right corner of the home screen. Android OS has battery charge detection system
and notify user if battery charge is low and device need to be connected to AC adapter. If you will see
such message, or your device couldn’t power on, connect original AC power adapter to charge your
device. Plug one end of the adapter into the power jack of the device, and the other to the power
socket. To extend the battery operation life, wait for finish of charge process.
Please, fully charge your new device after unpacking.
[Note]: it is normal if the device is warm or hot during charging, you can use it as usual, just follow the
respective security precautions.
2.2 Using the storage card
Your new Prestigio MultiPad 7.0 PRIME DUO Tablet PC is equipped with Micro SD card slot to
extend available device memory. It is compatible with Micro SD/ Micro SDHC/ TF-Flash card formats of
size up to 32Gb. Proper functioning of larger capacity cards is not guaranteed.
Insert the storage card
The storage card slot is located on the back side of the device:
To insert a card, remove protective cover of the memory card compartment as shown on a picture
above and insert the card (step 2 ) -place the card as shown on the picture and press it in card slot until
click. Card must be inserted effortlessly. DO NOT push the card too strong, it could damage the card slot
Correct
Incorrect
Open the cover
Step 1
Step 2