A35.
CAUTION TO REDUCE THE RISK OF FIRE, REPLACE WITH THE SAME TYPE AND RATING OF FUSE. ATTENTION UTILISER UN FUSIBLE DE RECHANGE MÊME TYPE. Safety compliance This product has been designed to meet the IEC 60065 international electrical safety standard.
The CE symbol indicates that this Primare product complies with the EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European Community. The WEEE symbol indicates this Primare product complies with the European Parliament and Council Directive 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE). This product must be appropriately recycled or processed in accordance with these directives. Consult your local waste disposal authority for guidance.
A35.
C ontents Welcome! 6 Getting Started 7 1 Unpack the A35.2 7 2 Connect speakers 7 3 Connect inputs 7 4 Connect power 7 5 Switch on 7 Automatic standby 7 Back-panel connections 8 Technical specification 9 Amplifier module 9 Power supply 9 Speaker outputs 9 Analogue inputs 9 Performance 9 General 9 Additional information 10 Phase 10 Burn-in 10 RS232 10 Trigger 10 Sense 10 Bridged mode 10 Index 11 A35.
W elcome ! Congratulations on selecting your new A35.2 Stereo Amplifier This user guide describes the features and explains how to set up the amplifier for the best sound quality and ease of operation in order to allow for the most enjoyable reproduction of sound from all your sources. For additional support and assistance please contact your local authorized Primare dealer, or visit our website at www.primare.net. A35.
Getting S tarted 1 Unpack the A35.2 3 Connect inputs 5 Switch on Your A35.2 is supplied with: l Connect the A35.2 to the preamplifier or processor using either the left and right RCA inputs, or the left and right XLR inputs. l Press the front panel standby switch, in the middle of the Primare logo. l l l l Mains cable IR/Trigger cable AC Polarity Pen (with batteries) Shorting link If any of these items are missing please contact your supplier.
Back-panel connections The following diagram explains the function of each of the connectors on the back panel: RIGHT SPEAKER LEFT SPEAKER ANALOG INPUT BALANCED TRIG IN SENSE INPUT OFF RCA OUTPUT GAIN UNBALANCED 2 CHANNEL NORMAL SHORT SPEAKER TRIG OUT RS232 Trigger RS232 ON XLR BRIDGED +6dB ONLY BRIDGED MODE Sense RCA/ Bridged Gain on/off XLR mode R RCA L Unbalanced inputs R XLR Balanced inputs L Right speaker Left speaker On/off, power, and fuse A35.
T echnical specification Amplifier module Performance General Primare UFPD 2 Gain Control Power supply XLR: 20dB RS232 Primare APFC Frequency response Auto Sense: on/off Speaker outputs Distortion Stereo 2 x 200W into 8Ω, 2 x 400W into 4Ω Bridged 1 x 800W into 8Ω, 1 x 500W into 4Ω Analogue inputs 1 x RCA, 15kΩ impedance 1 x XLR, 30kΩ impedance RCA: 26dB 20Hz – 20kHz: -0.2dB THD + N: < 0.
A dditional information These instructions help you get the best possible sound from your A35.2. Phase The phase of the AC supply can make a significant difference to the sound. Use the Polarity Pen supplied with the A35.2 to verify which pin is live on your AC power cable. Ensure that the live pin of the AC power cable is connected to the left-hand pin of the power connector, viewed from the back panel: Live Burn-in Your Primare will start to sound best after an initial burn-in of approximately 24 hours.
Index A S Automatic standby 7 Shorting link 10 Analogue inputs and outputs 8 B Back panel 8 Balanced inputs 8 Bridged mode 10 D DAC module 8 I Inputs, connecting 7 IR input 8 Sense 10 Speakers, connecting 7 Standby, automatic 7 Switching on 7 T Technical specification 9 Trigger 10 Trigger outputs 8 U Unbalanced inputs and outputs 8 N Network module 8 O Optical inputs 8 P Phase 10 Power, connecting 7 R RS232 input 8, 10 A35.
T H E S O U N D A N D V I S I O N O F S C A N D I N AV I A S I N C E 1 9 8 6 L imstensgatan 7 , 2 1 6 1 6 L imhamn , S weden More information at primare.