Instruction Manual

requirements and other provisions of directive 2014/53/EU.
The declaration of conformity may be consulted at UP Global Sourcing UK Ltd., Victoria Street,
Manchester OL9 0DD. UK or www.intempo.co.uk.
[3 MM CAPS HEIGHT] Care and Maintenance
Wipe the headphones with a soft, damp, lint-free cloth and allow to dry thoroughly.
Do not:
Use any abrasive cleaning solvents to clean the headphones
Expose the headphones to extremely high or low temperatures,
Drop the headphones
Attempt to disassemble the headphones
Dispose of the headphones in a fire, as it will result in an explosion.
Getting Started
Remove the product from the box.
Remove any packaging from the product.
Place the packaging inside the box and either store or dispose of safely.
In the Box
Industrial Headphones
USB Charging Cable
Instruction Manual
Description of Parts
1. Industrial Headphones
2. Play/Pause/Hands-free Button (PLAY/PAUSE/HANDS-FREE)
3. Skip/Volume + Button (+)
4. Skip/Volume – Button (–)
5. LED Indicator Light
6. Micro USB Charging Port
7. Hands-free Microphone
8. Aux. Input Port
9. USB Charging Cable
10. Micro USB Connector
11. USB Connector
Instructions for Use
Charging the Battery
The headphones are fitted with a 3.7 V 250 mAh battery (non-removable). It is recommended that the
battery is fully charged before first use; this will take approx. 1.5 hours.
Connect the micro USB end of the USB charging cable into the micro USB charging port on the
headphones and the other end to a compatible USB port.
Whilst charging, the LED indicator light will illuminate red. Once the battery has fully charged, the LED
indicator light will turn off.
Carefully disconnect both ends of the USB charging cable and store it safely for future use.
Using the Industrial Headphones
Basic Functionality
Turn on the headphones by pressing and holding ‘PLAY/PAUSE/HANDS-FREE’ for approx. 3
seconds.